Geoptimaliseerde werking van de biogasinstallatie door scheiding
Separator XSplit® in de biogasintallatie

De scheiding met de XSplit opent economische oplossingen om de efficiëntie van een biogasinstallatie te verhogen of bedrijfsstoringen en uitval van componenten te voorkomen. Als bijvoorbeeld als gevolg van een substraatomschakeling verhoogde verhoudingen van langvezelige vaste stoffen zoals mest, maïsstro of landschapsverzorgingsmateriaal worden gevoerd, leidt dit tot een toename van de viscositeit van de suspensie. Pompen en roerwerken of mixers nemen meer vermogen op. Tegelijkertijd bevatten ze een hoog gehalte aan lignine en semi-cellulose, voor de afbraak waarvan de verblijftijd vaak te kort is. De specifieke gasopbrengst daalt. 

Scheiding met de XSplit kan dit verhelpen en verdere voordelen genereren. Als de vaste deeltjes van de suspensie worden gescheiden, kunnen ze terug in de fermentor worden gevoerd. Zo wordt de verblijftijd verlengd, kan een hoger percentage organisch materiaal worden omgezet in biogas, de gasopbrengst neemt toe.  

Als de digestaat wordt gescheiden, kan de vloeibare fase, die een aanzienlijk deel uitmaakt, terug naar de fermentor worden geleid. Dit vermindert de viscositeit van de suspensie, het stroomverbruik van pompen en mixers neemt af.  

De voorheen van de digestaat gescheiden vaste stoffen kunnen afzonderlijk worden opgeslagen en kunnen efficiënter worden getransporteerd. Tegelijkertijd moeten er minder opslagcapaciteiten voor vloeibare digestaat worden aangehouden.  

En het scheiden van de digestaat heeft nog meer voordelen. Net als bij mest kan de bemesting met digestaat dienovereenkomstig worden aangepast. Vooral de vloeibare fase is zeer geschikt voor bemesting op grasland, omdat de digestaat dankzij zijn verhoogde vloeibaarheid sneller in de grond doordringt.

 

Downloads

Eigenschappen van de XSplit®

The inlet nozzle, like the filtrate nozzle, can be rotated in 90° increments and can be mounted both at the top and at the bottom in a connector size of 6". This allows flexible adaptation to the respective situation on site.
The screw of the XSplit press screw separator is made of stainless steel and specially armored for extra durability. Fiber pockets are integrated for self-cleaning.
The wear-resistant elastomer closure disc ensures automatic plug formation without the use of additional auxiliary agents.
The drive motor is located on the solid side and thus has no contact with the liquid during the separation. The conveying and separation direction is towards the drive. Therefore, the XSplit does not require an extra mechanical seal or radial shaft seal.
The length of the pressing area can be adjusted by means of a threaded spindle. A longer pressing area means higher dry matter content of the solid phase.
The sieve basket of the XSplit separator consists of three sieve elements. These are individually replaceable and enable optimum service performance and individual adaptation to the output medium.
The generous end cover provides easy access to the sieve and screw. In addition, four 6" cleaning ports provide good access to the interior of the XSplit. Service and maintenance work is completed quickly.

Opties van de XSplit®

With the stud frame, the XSplit is easily and quickly elevated. Pumps and, if necessary, a shredder can also be assembled on the base frame, so that the installation effort on site is reduced.
Compact unit including pump, optional shredder and the XSplit separator, which is folded out and positioned in an elevated position by means of hydraulics. Completely pre-assembled including static calculation, the basic hoisting gear is the ideal solution for changing locations.
Drive up, set up, connect, get started. Assembled on a trailer, the hoisting gear pro complete solution is the flexible variant for inter-company use. All components including hydraulics are fully assembled and connected to the controller. A generously dimensioned projection and ejection height make it possible, for example, to separate directly on high trailers.
Depending on the customer's requirements, we offer the necessary control technology for manual operation of the individual components up to control with touch panel and intuitive user interface.

Neem contact op met

Vind details over uw

Persoonlijk contact

Downloads

Bent u op zoek naar brochures?

Download Centrum

Nieuwsbrief

Blijf op de hoogte!

Registreer u nu!