XSplit press screw separator by Vogelsang

Innovatief concept voor onderhoudsarme separatie
XSplit®

  • Drogestofpercentage tot wel 40% mogelijk
  • Verstelmogelijkheid om het drogestofpercentage aan te passen
  • Gemakkelijke toegang tot zeef en vijzel voor snel onderhoud
  • Automatische propvorming
  • Ideale resultaten door hoogwaardige elastomeer sluitring

Contact

Effectieve separatie van vaste en vloeibare fracties

De separator XSplit®: laag energie verbruik en gemakkelijke bediening dankzij innovatief ontwerp

De XSplit separator van Vogelsang combineert het beproefde concept van de vijzelpers met een volledig ander ontwerp. Het resultaat is een nieuwe separator met unieke eigenschappen en opmerkelijke voordelen voor de gebruiker. 

Bij de ontwikkeling van de nieuwe XSplit-separator heeft Vogelsang het beproefde functionele concept van de vijzelpers overgenomen en de technische uitvoering volledig herzien. De aandrijving is nu aan de vaste perszijde geplaatst. Dit is één van de unieke eigenschappen van de
XSplit.

Wist je dat?
De separatie van digestaat of drijfmest is een waardevolle praktijk gebleken. Omdat alleen de vloeibare fractie de silo ingaat, wordt de vorming van drijf- en bezinklagen aanzienlijk verminderd. Bovendien is de afgescheiden dikke fractie gemakkelijk te transporteren en kan het worden gebruikt als een meststof met een hoog organische stofgehalte. De afgescheiden dunne vloeistof kan daarentegen veel gemakkelijker en gelijkmatiger worden uitgereden.

Modellen van de XSplit®

Separatie opnieuw geïntegreerd

Separator XSplit®

Bij de ontwikkeling van de nieuwe separator XSplit heeft Vogelsang het beproefde concept van de vijzelpers met een volledig nieuw ontwerp uitgevonden. Op basis hiervan overtuigt de XSplit met een zeer goede kosten-batenverhouding. Dit maakt een hoge doorvoercapaciteit tot 50 m3/u mogelijk. Aan de andere kant maakt het nieuwe concept een drogestofgehalte van maximaal 40 procent mogelijk, waardoor het superieur is aan andere schroefpersscheiders. 

Downloads

Separatie opnieuw geïntegreerd

Separator XSplit®

Bij de ontwikkeling van de nieuwe separator XSplit heeft Vogelsang het beproefde concept van de vijzelpers met een volledig nieuw ontwerp uitgevonden. Op basis hiervan overtuigt de XSplit met een zeer goede kosten-batenverhouding. Dit maakt een hoge doorvoercapaciteit tot 50 m3/u mogelijk. Aan de andere kant maakt het nieuwe concept een drogestofgehalte van maximaal 40 procent mogelijk, waardoor het superieur is aan andere schroefpersscheiders. 

Downloads

Eigenschappen van de XSplit®

The inlet nozzle, like the filtrate nozzle, can be rotated in 90° increments and can be mounted both at the top and at the bottom in a connector size of 6". This allows flexible adaptation to the respective situation on site.
The screw of the XSplit press screw separator is made of stainless steel and specially armored for extra durability. Fiber pockets are integrated for self-cleaning.
The wear-resistant elastomer closure disc ensures automatic plug formation without the use of additional auxiliary agents.
The drive motor is located on the solid side and thus has no contact with the liquid during the separation. The conveying and separation direction is towards the drive. Therefore, the XSplit does not require an extra mechanical seal or radial shaft seal.
The length of the pressing area can be adjusted by means of a threaded spindle. A longer pressing area means higher dry matter content of the solid phase.
The sieve basket of the XSplit separator consists of three sieve elements. These are individually replaceable and enable optimum service performance and individual adaptation to the output medium.
The generous end cover provides easy access to the sieve and screw. In addition, four 6" cleaning ports provide good access to the interior of the XSplit. Service and maintenance work is completed quickly.

Opties van de XSplit®

With the stud frame, the XSplit is easily and quickly elevated. Pumps and, if necessary, a shredder can also be assembled on the base frame, so that the installation effort on site is reduced.
Compact unit including pump, optional shredder and the XSplit separator, which is folded out and positioned in an elevated position by means of hydraulics. Completely pre-assembled including static calculation, the basic hoisting gear is the ideal solution for changing locations.
Drive up, set up, connect, get started. Assembled on a trailer, the hoisting gear pro complete solution is the flexible variant for inter-company use. All components including hydraulics are fully assembled and connected to the controller. A generously dimensioned projection and ejection height make it possible, for example, to separate directly on high trailers.
Depending on the customer's requirements, we offer the necessary control technology for manual operation of the individual components up to control with touch panel and intuitive user interface.

Meer over het product

XSplit® voor elke sector

Neem contact op met

Vind details over uw

Persoonlijk contact

Downloads

Bent u op zoek naar brochures?

Download Centrum

Nieuwsbrief

Blijf op de hoogte!

Registreer u nu!