Optimaal beheer van meststoffen door separatie op de eigen boerderij
Separator XSplit® voor landbouwtoepassingen

Door een toename van het aantal dieren neemt ook de hoeveelheid meststoffen toe. De weersinvloeden in de verschillende seizoenen en een op de behoefte afgestemde bemesting zorgen ervoor dat de meststof niet volledig kan worden gebruikt in veeteeltgebieden. Dit leidt tot opslagproblemen en/of transportproblemen. Want opslagcapaciteit is niet oneindig beschikbaar en het transport van ruwe mest heeft een lage transportefficiëntie. 

De separatietechniek kan dit verhelpen en verdere voordelen bieden in de omgang met het mestmanagement. Door de separatie van de ruwe mest met de XSplit worden vaste van vloeibare bestanddelen gescheiden en kunnen ze apart worden opgeslagen. Vooral bij vaste mest met een hoog drogestofgehalte neemt het volume af en kan de bestaande opslagcapaciteit efficiënter worden benut.  

Mest bestaat bovendien voor ongeveer 90% uit water. Als vloeibare bestanddelen voor het transport worden gescheiden, concentreren hogere meststoffen zich op kleinere ruimtes en wordt het transport rendabeler.  

Maar de separatietechniek heeft nog meer voordelen. Afhankelijk van het gewas en het seizoen kan de bemesting met gescheiden mest hierop worden aangepast. Vooral de vloeibare fase is bijzonder geschikt voor bemesting op grasland. Door de verhoogde vloeibaarheid dringt de meststof snel in de grond. Het verhoogde ammoniumgehalte versnelt ook het stikstofeffect van de mest.  

De mest wordt ook gehomogeniseerd door de separatietechniek. Mest is een heterogene meststof die voor gebruik moet worden geroerd. Als er minder vaste bestanddelen in de mest zitten, worden de voedingsstoffen automatisch gelijkmatiger verdeeld. Dit elimineert het eerdere roeren.

Downloads

Eigenschappen van de XSplit®

The inlet nozzle, like the filtrate nozzle, can be rotated in 90° increments and can be mounted both at the top and at the bottom in a connector size of 6". This allows flexible adaptation to the respective situation on site.
The screw of the XSplit press screw separator is made of stainless steel and specially armored for extra durability. Fiber pockets are integrated for self-cleaning.
The wear-resistant elastomer closure disc ensures automatic plug formation without the use of additional auxiliary agents.
The drive motor is located on the solid side and thus has no contact with the liquid during the separation. The conveying and separation direction is towards the drive. Therefore, the XSplit does not require an extra mechanical seal or radial shaft seal.
The length of the pressing area can be adjusted by means of a threaded spindle. A longer pressing area means higher dry matter content of the solid phase.
The sieve basket of the XSplit separator consists of three sieve elements. These are individually replaceable and enable optimum service performance and individual adaptation to the output medium.
The generous end cover provides easy access to the sieve and screw. In addition, four 6" cleaning ports provide good access to the interior of the XSplit. Service and maintenance work is completed quickly.

Opties van de XSplit®

With the stud frame, the XSplit is easily and quickly elevated. Pumps and, if necessary, a shredder can also be assembled on the base frame, so that the installation effort on site is reduced.
Compact unit including pump, optional shredder and the XSplit separator, which is folded out and positioned in an elevated position by means of hydraulics. Completely pre-assembled including static calculation, the basic hoisting gear is the ideal solution for changing locations.
Drive up, set up, connect, get started. Assembled on a trailer, the hoisting gear pro complete solution is the flexible variant for inter-company use. All components including hydraulics are fully assembled and connected to the controller. A generously dimensioned projection and ejection height make it possible, for example, to separate directly on high trailers.
Depending on the customer's requirements, we offer the necessary control technology for manual operation of the individual components up to control with touch panel and intuitive user interface.

Neem contact op met

Vind details over uw

Persoonlijk contact

Downloads

Bent u op zoek naar brochures?

Download Centrum

Nieuwsbrief

Blijf op de hoogte!

Registreer u nu!