Optimales Nährstoffmanagement durch Separation am eigenen Hof
Der Pressschneckenseparator XSplit® für landwirtschaftliche Anwendungen

Durch ein gesteigertes Tieraufkommen wächst auch die Menge an Wirtschaftsdünger. Das, sowie Wettereinflüsse in den verschiedenen Jahreszeiten und eine bedarfsgerechte Düngung führen dazu, dass der Dünger in Gebieten der Tierhaltung nicht komplett genutzt werden kann. Daraus schließen sich Lagerprobleme oder auch Transportprobleme. Denn Lagerkapazitäten sind nicht unendlich verfügbar und der Transport von Rohgülle hat eine nur geringe Transporteffizienz.

Die Separationstechnik kann hierbei Abhilfe schaffen und für weitere Vorteile im Umgang mit dem Nährstoffmanagement am Betrieb sorgen. Durch die Separation der Rohgülle mit dem XSplit werden feste von flüssigen Bestandteilen getrennt und können separat gelagert werden. Besonders bei festerer Gülle mit hohen Trockensubstanzgehalten reduziert sich das Volumen und die vorhandene Lagerkapazität kann effizienter genutzt werden.

Gülle besteht zudem zu ca. 90 % aus Wasser. Werden flüssige Bestandteile vor dem Transport separiert konzentrieren sich höhere Nährstoffanteile auf kleineren Raum und der Transport wird rentabler.

Aber die Separationstechnik birgt weitere Vorteile. Je nach Kultur und Jahreszeit kann die Dünung mit separierten Wirtschaftsdüngern entsprechend angepasst werden. Vor allem die flüssige Phase eignet sich besonders für die Düngung auf Grünlandflächen. Durch die erhöhte Fließfähigkeit dringt der Dünger schnell in den Boden ein. Der erhöhte Ammonium-Anteil beschleunigt zudem die Stickstoffwirkung der Gülle.

Ebenso wird die Gülle durch die Separationstechnik homogenisiert. Gülle ist ein heterogener Dünger, der vor Ausbringung aufgerührt werden muss. Sind weniger feste Bestandteile in der Gülle enthalten werden die Nährstoffe automatisch gleichmäßiger verteilt. Dadurch entfällt das vorherige Aufrühren.

Downloads

Features des XSplit®

The inlet nozzle, like the filtrate nozzle, can be rotated in 90° increments and can be mounted both at the top and at the bottom in a connector size of 6". This allows flexible adaptation to the respective situation on site.
The screw of the XSplit press screw separator is made of stainless steel and specially armored for extra durability. Fiber pockets are integrated for self-cleaning.
The wear-resistant elastomer closure disc ensures automatic plug formation without the use of additional auxiliary agents.
The drive motor is located on the solid side and thus has no contact with the liquid during the separation. The conveying and separation direction is towards the drive. Therefore, the XSplit does not require an extra mechanical seal or radial shaft seal.
The length of the pressing area can be adjusted by means of a threaded spindle. A longer pressing area means higher dry matter content of the solid phase.
The sieve basket of the XSplit separator consists of three sieve elements. These are individually replaceable and enable optimum service performance and individual adaptation to the output medium.
The generous end cover provides easy access to the sieve and screw. In addition, four 6" cleaning ports provide good access to the interior of the XSplit. Service and maintenance work is completed quickly.

Optionen des XSplit®

With the stud frame, the XSplit is easily and quickly elevated. Pumps and, if necessary, a shredder can also be assembled on the base frame, so that the installation effort on site is reduced.
Compact unit including pump, optional shredder and the XSplit separator, which is folded out and positioned in an elevated position by means of hydraulics. Completely pre-assembled including static calculation, the basic hoisting gear is the ideal solution for changing locations.
Drive up, set up, connect, get started. Assembled on a trailer, the hoisting gear pro complete solution is the flexible variant for inter-company use. All components including hydraulics are fully assembled and connected to the controller. A generously dimensioned projection and ejection height make it possible, for example, to separate directly on high trailers.
Depending on the customer's requirements, we offer the necessary control technology for manual operation of the individual components up to control with touch panel and intuitive user interface.

Kontakt

Finden Sie Details zu Ihrem

Persönlichen Kontakt

Downloads

Sind Sie auf der Suche nach Broschüren?

Download Center

Newsletter

Bleiben Sie auf dem Laufenden!

Registrieren Sie sich jetzt!